The E-892 is a high quality outdoor surveillance camera for medium range applications. It combines a high resolution day/night camera and vari-focal day/night lens with an infra-red illuminator and IP67 rated enclosure.

FEATURES:

• CCD Sensor: 1/3” Sony Super HAD II 
• Resolution: 520 TVL (Colour Mode) 550 TVL (B/W Mode)
• S/N Ratio: Greater than 50 dB (AGC off) 
• Lens: Infra-Red Compatible 9 ~ 22mm Vari-Focal Lens  
• White Balance: Auto (2100K ~ 9100K)
• OSD Menu: Yes (via included plug-in remote)
• Infra-Red LEDs: 850 nm (14 x 10mm diam 14deg LEDs & 14 x 8mm diam 20deg LEDs )
• Effective Infra-Red Range: 30~40 Metres (Environment Dependent) 
• LED Lifetime: 20'000 hours 
• Day/Night Type: Mechanical Switch-Over at 5 Lux (OSD COnfigurable)
• Weatherproof Rating: IP67
• Operating Temp.: -10º C ~+ 50º C
• Power: 24VDC (19~35VDC) @ 550 mA, 120mA (IR off) or 24VAC 
• Surge Protection: Yes
• Bracket: 3-Axis
• Weight: 1700g
• Dimensions (mm): 112 (W) x 121 (V) x 287 (L) mm

TRUE DAY / NIGHT

Unlike many other all-in-one infra-red surveillance cameras, the E-892 has been designed to provide true colour reproduction in the day and B/W infra-red imaging at night with no focus shift. It achieves this by using a mechanical day/night switch over filter which removes the IR-cut filter from the CCD when switching to the B/W mode. Most other IR cameras to cut costs have a selective IR filter which is permanently fixed to the CCD. The advantage of the mechanical IR filter is that it physically removes the IR filter and thus allows the CCD in the B/W mode, to be exposed by the maximum amount of light. One is able to configure the Lux switch-over level by using the OSD menu.

LENS

The lens fitted to the E-892 is a vari-focal type and can be manually adjusted between 9 ~ 22 mm. Extremely innovative, this camera has two screw adjustments for focus and focal length. These mean the installer does not even have to open the camera housing to configure the camera or lens. Thus saving at least 50% of the installation time. This also helps to reduce the chance of any condensation within the camera's housing.

INFRA-RED LEDS

Surrounding the E-892's Lens is an LED-based Infra-Red Illuminator. This switches on when the camera moves to the day/night mode. It provides extensive illumination for the camera in the B/W mode allowing surveillance in conditions with poor or no lighting. The E-892 has a special circuit to protect the LEDs from burn-out and threfore extend the lifetime.

CONSTRUCTION

Designed to be rugged, the E-892 has a solid aluminium-alloy body with double O-ring seals. It is IP67 weatherproof rated and has an adjustable 3-axis bracket. This bracket allows one to ceiling mount or wall mount the camera in various positions adjustable by pan/tilt or rotation.