E-GB001
Video Ground Loop Isolator
MSRP Starting Price: R 578.00
Product DatasheetVideo Ground Loop Isolator
-
BNC male to BNC female with short fly-lead.
-
Passive operation - no power required.
-
Prevents video - signal distortion caused by video ground loops.
-
Eliminates picture tearing, cross talk and rolling.
-
Built in Transient Voltage Suppressors for surge protection Isolation Voltage 600VDC (Min)
-
Insertion Loss: 0.5dB
-
Frequency Response: 0-3dB at 10Mhz
-
Insulation Resistance: 100m Ohm
-
Transient Voltage Suppressors: 12 Vrms
- Dimensions: (mm) 84x28x21 with 15cmx2 cable
One of the single biggest problems that occur in the CCTV industry, is that of ground
loops.
A ground loop occurs when different pieces of mains powered CCTV hardware in the same system are connected to ground in different places.When this happens a ground
differential is present which leads to what can be seen as interference on the video signal.
This may present as horizontal or veritcal rolling lines (hum bars) across the screen.
The E-GB001 will help overcome this, by breaking the co-axial cable ground circuit while
still allowing the co-axial screen to function.The unit is connectected inline to the co-axial
cable at the monitor or DVR side where the problem is occuring.